imrishabh18/fitness_watch

This circuit integrates an ESP-12E microcontroller with various sensors and peripherals, including a AO3400A MOSFET for switching loads, to enable wireless control and sensor data processing.

Version: 1.0.12
License: unset
Stars: 1

validation/placement.log

placement summary: 2 suboptimal orientations

worst issues:
1. R14 connections cross the routing path between its pads. Suggested move: rotate R14 180 degrees.
2. C11 connections cross the routing path between its pads. Suggested move: rotate C11 180 degrees.

board top-layer utilization:
- occupied: 37.381% (747.629mm^2 of 2000mm^2)
- empty spaces over 5% of board area:
  - 24.748% (494.96mm^2); bounds=(minX=-11.8mm, maxX=25mm, minY=-20mm, maxY=-6.55mm)
  - 7.75% (155mm^2); bounds=(minX=-25mm, maxX=25mm, minY=16.9mm, maxY=20mm)
  - 5.805% (116.1mm^2); bounds=(minX=-25mm, maxX=-14.2mm, minY=-20mm, maxY=-9.25mm)

board-edge status:
- U2: 5mm inside bottom edge
- J1: 2.2mm inside left edge
- U1: 14.648mm inside bottom edge
- C3: 17.5mm inside right edge
- C4: 12.85mm inside bottom edge
- R3: 13.068mm inside bottom edge
- R4: 15.568mm inside bottom edge
- R5: 18.068mm inside bottom edge
- R6: 16.843mm inside right edge
- SW_RST: 0.925mm inside right edge
- SW_NAV: 1.425mm inside right edge
- DS1: 3.69mm inside top edge
- U4: 4.6mm inside top edge
- U5: 17.425mm inside top edge
- U6: 17.15mm inside left edge
- M1: 5.915mm inside right edge
- R14: 13.568mm inside top edge
- R15: 15.843mm inside right edge
- R16: 14.068mm inside top edge
- R17: 18.843mm inside right edge
- C10: 10.55mm inside top edge
- C11: 2.55mm inside top edge
- C15: 15.15mm inside top edge
- C8: 4.55mm inside top edge
- C9: 8.55mm inside top edge
- C13: 16.05mm inside bottom edge
- C16: 16.55mm inside top edge
- C12: 12.825mm inside bottom edge
- C14: 16.05mm inside top edge
- Q1: 6.5mm inside right edge
- R9: 10.843mm inside right edge
- R13: 6.843mm inside right edge
- D2: 10.328mm inside right edge
- J2: 3.85mm inside bottom edge
- C6: 10.55mm inside bottom edge
- C7: 7.325mm inside bottom edge

flagged components:
- R14
  source placement: placement_mode=none
  resolved placement: center=(10mm, -6mm) on top; bounds=(minX=8.843mm, maxX=11.157mm, minY=-6.432mm, maxY=-5.568mm); size=(width=2.313mm, height=0.864mm); anchor_alignment="center"
  board edge status: 13.568mm inside top edge
  issues:
  - R14 connections cross the routing path between its pads. Suggested move: rotate R14 180 degrees.
- C11
  source placement: placement_mode=none
  resolved placement: center=(-3mm, -17mm) on bottom; bounds=(minX=-4.1mm, maxX=-1.9mm, minY=-17.45mm, maxY=-16.55mm); size=(width=2.2mm, height=0.9mm); anchor_alignment="center"
  board edge status: 2.55mm inside top edge
  issues:
  - C11 connections cross the routing path between its pads. Suggested move: rotate C11 180 degrees.

placement drc:
Errors: 0
Warnings: 0

validation/placement.log

Related Packages