tscircuit/autorouting-dataset-01

This code manages the hardware and electronic components for circuit design and PCB layout, defining components like resistors, capacitors, transistors, connectors, and footprints, and providing tools for component placement, PCB topology, and electrical connections.

Version
1.0.102
License
unset
Stars
4

lib/circuit/circuit019.tsx

PCBPCB preview for lib/circuit/circuit019.tsx
SchematicSchematic preview for lib/circuit/circuit019.tsx
/** QRE1113 reflectance sensor breakout with 3-pin header and bias resistors. */
import { sel } from "@tscircuit/core"
import { shouldAutorouterRun } from "lib/shouldAutorouterRun"

export const JP1_FOOTPRINT = (
  <footprint>
    <smtpad
      portHints={["pin1"]}
      pcbX="-2.54mm"
      pcbY="5mm"
      width="1mm"
      height="3mm"
      shape="rect"
    />
    <smtpad
      portHints={["pin2"]}
      pcbX="0mm"
      pcbY="5mm"
      width="1mm"
      height="3mm"
      shape="rect"
    />
    <smtpad
      portHints={["pin3"]}
      pcbX="2.54mm"
      pcbY="5mm"
      width="1mm"
      height="3mm"
      shape="rect"
    />
  </footprint>
)

export const U1_FOOTPRINT = (
  <footprint>
    <smtpad
      portHints={["pin1"]}
      pcbX="-2.1082mm"
      pcbY="-0.889mm"
      width="1.2192mm"
      height="0.5334mm"
      shape="rect"
    />
    <smtpad
      portHints={["pin2"]}
      pcbX="2.1082mm"
      pcbY="-0.889mm"
      width="1.2192mm"
      height="0.5334mm"
      shape="rect"
    />
    <smtpad
      portHints={["pin3"]}
      pcbX="2.1082mm"
      pcbY="0.889mm"
      width="1.2192mm"
      height="0.5334mm"
      shape="rect"
    />
    <smtpad
      portHints={["pin4"]}
      pcbX="-2.1082mm"
      pcbY="0.889mm"
      width="1.2192mm"
      height="0.5334mm"
      shape="rect"
    />
  </footprint>
)

export default () => (
  <board
    routingDisabled={!shouldAutorouterRun()}
    width="7.62mm"
    height="13.97mm"
  >
    <pinheader
      gender="female"
      footprint="pinrow3_p2.54_id1.016_od1.8796_nosquareplating_pinlabeltextalignright_pinlabelorthogonal"
      pinCount={3}
      name="JP1"
      schPinArrangement={{
        rightSide: {
          direction: "bottom-to-top",
          pins: [1, 2, 3],
        },
      }}
      pcbY={-5.715}
      layer="bottom"
      schFacingDirection="left"
      pcbPinLabels={{ pin1: "VCC", pin2: "OUT", pin3: "GND" }}
    />
    <netlabel
      net="VCC"
      anchorSide="bottom"
      connection="JP1.pin1"
      schX={-0.9}
      schY={0.5}
    />
    <netlabel
      net="GND"
      anchorSide="top"
      connection="JP1.pin3"
      schX={-0.9}
      schY={-0.5}
    />
    <resistor
      name="R2"
      resistance="10k"
      footprint="0603"
      schRotation={90}
      schX={-2.7}
      schY={1}
      pcbX={-1.524}
      pcbY={-3.175}
      connections={{
        pin1: sel.JP1.pin2,
        pin2: sel.net.VCC,
      }}
      pcbRotation={180}
    />
    <resistor
      name="R1"
      resistance="100"
      footprint="0603"
      schRotation={90}
      schX={-3.7}
      schY={1}
      pcbX={1.524}
      pcbY={-3.175}
      pcbRotation={180}
      connections={{
        pin2: sel.net.VCC,
      }}
    />
    <chip
      name="U1"
      manufacturerPartNumber="QRE1113:1"
      footprint={U1_FOOTPRINT}
      schPinArrangement={{
        topSide: {
          direction: "left-to-right",
          pins: [1, 3],
        },
        bottomSide: {
          direction: "left-to-right",
          pins: [2, 4],
        },
      }}
      pcbY={-0.635}
      pcbRotation={180}
      schPinStyle={{
        pin1: {
          rightMargin: 0.4,
        },
        pin2: {
          rightMargin: 0.4,
        },
      }}
      schX={-3}
      schY={-1.3}
      connections={{
        pin1: sel.R1.pin1,
        pin2: sel.net.GND,
        pin3: sel.R2.pin1,
        pin4: sel.net.GND,
      }}
    />
    <schematictext
      text="OUT"
      color="gray"
      fontSize={0.2}
      schX={-2}
      schY={0.2}
    />
    <hole diameter="3.32mm" pcbY={4.445} />
  </board>
)